Green PTFE Coated Wire Mesh With Fantastic Hydrophobic Performance
PTFE COATED WIRE MESH INTRODUCTION:
PTFE coated wire mesh refers to woven wire mesh which is coated with fine resin. The wire mesh, with mesh size of 100 per inch, 200 per inch or 325 per inch, is woven from stainless steel wire diameter which is heavier than that used to weave bolting cloth. The () coating serves to increase the hydrophobic properties of the filter by allowing the passage of fuel but inhibiting the passage of water in the coalescer-based system. Finished products are specific used for filter devices, especially for industrial cartridge filters in high-temperature and chemical-resistant applications.
Green color may be inconsistent from roll to roll or even within the roll. This variation does not affect performance.
Material:
Wire mesh: stainless steel 304/316L
Coating: Polytetrafluoroethylene () resin.
Specification
Wire diameter: 0.0014", 0.0021", 0.0045".
Mesh size: 100, 200, 325 per inch.
Temperature Range: -73 °C to 260 °C.
Color: green.
Standard: ASTM
| mesh/inch | Wire diameter | Opening | Opening Microns | Open area | Weight |
| inch | mm | mm | % | lb/sq. ft | |
| 200 | 0.0021 | 0.05334 | 0.07366 | 74 | 33.6 | 0.06 |
Features
Excellent hydrophobic performance.
Wide range of working temperature.
Chemically resistant and self-lubricating.
High tear-strength and good flex-life.
Designed for efficient operation & cost saving.
Easily to clean during maintenance & service operations.
Application
PTFE coated wire mesh are commonly used as filter element in industrial applications.
Chemicals, resins and solvents.
Hydraulic oils.
Petroleum refining.
Power generation.
Pulp and paper industry.
Fuel lines.
Package:
packed in roll, wrapped with moister-proof paper, put into wooden cases, or according to your requirements.
